Advantages and applications of PVC blister film

The steps to apply PVC blister film are as follows:

First, after we finish, then polish and spray special glue for PVC plastic. After drying, we can do blister. According to the actual situation of some blister equipment, some doors need to be raised by one centimeter, so the temperature of the blister machine is generally set At about 160 degrees, the preheating time is set to about 20 seconds, and the blister time is set to about 50 seconds after blister. Lower the temperature slightly, then tear off the PVC film on the surface, spray glue on the other side of the door, and then suction Plastic, especially the glue needs to be sprayed evenly around the door. The lines around the door after blister overlap, that is, blister twice on all sides.

After the blister is completed, if the blister is not in place in some places around the door, or the transferred ink is separated due to improper tearing of the film, you can spray glue to stick a small piece of film there, then spray PU paint, and lightly apply the primer after drying. Polish, then touch up the color or spray with a polyurethane topcoat.

PVC film for wardrobes has high transparency, high viscosity, certain water resistance and corrosion resistance. It is suitable for different industries, has various styles and meticulous workmanship. It can be used directly as packaging bags and is widely used in packaging of different products.

Plasticizers are added to the raw materials. This plasticizer has high transparency and high viscosity and is used in many places. The PVC blister film itself has a certain degree of water resistance and corrosion resistance, which guarantees its practicality. , this kind of film is mainly composed of polyvinyl chloride and is generally suitable for light and small products such as food, medicine, electrical appliances, daily necessities, cosmetics, toys, etc.

sale02@sdzlplastic.com

www.sdzlplastic.com