2

What is HIPS plastic?

2023-11-30 11:13

High Impact Polystyrene (HIPS) This is a low cost and rigid plastic material often used in applications such as cookie and candy trays, deli containers and food service items. 

In addition to offering custom colored HIPS, Tray-Pak also processes utility grade and anti-static HIPS.


The relative density of HIPS is 1.04~1.06 and the thermal deformation temperature is 70~84℃. 

The HIPS tensile strength is about 15~30MPa and the elongation is 35~60%. 

It increases with the decrease of temperature and the increase of strain rate, somewhat like a rubber toughening system. 

HIPS behaves somewhat like a viscoelastic solid and can creep when exposed to constant tensile stress. Creep decreases with increasing molecular weight and generally increases with increasing rubber content. 

The creep behavior of HIPS is strongly dependent on the average molecular weight (MW). The bending strength is 29.4~50 MPa, the impact strength is 0.09~0.16N/M, the Vicat softening point is 84~100℃, and the melt index is 2~9g/10min. The heat resistance of HIPS components depends on their shape, production conditions, heat source type and heating duration, and is also affected by the HIPS grade.


When exposed to water, base and dilute inorganic acids, HIPS properties are not affected. 

It can be swelled by some organic solvents and dissolved by others, depending on the difference in dissolution parameters between the continuous phase and the solvent phase. 

HIPS are particularly vulnerable to damage when exposed to chlorinated and aromatic hydrocarbons.  




Properties:

Good opacity

Food safe

Excellent moisture barrier for short shelf life products

Strong impact resistance

Can be directly used for food packaging

Thermal stability at elevated temperatures

Good mechanical properties,Impact strength 

Good Tensile break strength,Tensile yield strength,Elongation at break 

Good performance on Chemical and electrical resistance

Resistant to most solvents,UV Block,good glossy


Plz contact Tania:

Email: sale01@sdzlplastic.com

Whatsapp/Wechat: +86 15063737201.

Get the latest price? We'll respond as soon as possible(within 12 hours)
This field is required
This field is required
Required and valid email address
This field is required
This field is required
For a better browsing experience, we recommend that you use Chrome, Firefox, Safari and Edge browsers.